How to Open Tumble Dryers
On a first glance the inside of a tumble dryer can look confusing and if your dryer is having a problem then you will need to know how to navigate your way through this confusion. In order to open a tumble dryer you need to disconnect it from the power source before you do anything. Once it is disconnected from the power, you need to remove the cover screw that is located close to the lint trap. The next thing you need to do is get a putty knife and insert it into the groove amid on the top and side panels.This step is not required will all models of tumble dryers, with some you may just need force for unfasten a clip.
You will need to loosen a front rear panel to obtain access to the front of the dryer. In order to support your dryer, you can place to chunks or bricks near the detached door wires. Once the dryer is lifted off the ground you will have access to the dryers components dryer repair los angeles.
Reasons Why Tumble Dryers Won’t Work
If your dryer is refusing to work, then it can be a number of things. The first thing you should check is if the dryer is receiving current from the power cord or outlet. To see if its getting electricity, you should check different outlets and the circuit breaker. Make sure that the power cord is firmly in the wall and connected to the dryer. If electricity is not the issue, then you may want to look at the door handle. If you need to purchase and replace your new door control, then it can be located near the top or the front of the dryer. If you don’t think that the door is the issue, then you the interior fuse may be your problem. It is located near most exhaust ducts. If the internal fuse is damaged or destroyed, there is no way that your dryer will work.
There is No Heat Being Generated
If your tumble dryer is tumbling but not generating heat, need to test the electricity. Your dryer may be using circuits and fuses, so both would need to be checked. On most dryers with two fuses and circuits, one is for the heat and the other is for the motor. If you purchased a gas tumble dryer, then the heat may not be getting to the dryer. The ignition source may just need a quick replacement. If you know that there is gas in the ignition source, then you should check the pilot light to make sure that its lit. Electricity is most likely the problem in heat related issues, and if you check all electrical sources related to heat, then you will most likely find the problem.
This article is meant to give the basics in tumble dryer repair as well as give you some ideas at what your problem may be. When it comes to fixing your dryer, if you have the ability to fix it yourself, then go for it. However, it is probably best to call a mechanic because tumble dryers can be expensive, and you don’t want to spend money replacing one if you don’t have to.